22 x 28 Poster Stand w/ Literature Holder, 4″/8.5″w, Snap Open, Double Sided – Silver

Product Description

Poster Literature Stand with Two 22×28 Frames & Two Magazine Holders

This poster literature stand is ideally meant for use in a business or retail environment. The combination display allows a user to advertising specials, promotions and new products and, at the same time, offer takeaway pamphlets and brochures to customers. The FORTE poster literature stand, also known as a floor-standing advertising fixture, has a tremendous impact on the overall effectiveness of a marketing campaign. Passersby are drawn in by eye-catching graphics. Once they are near the display, they can get additional information from a selection of brochures, catalogs or magazines. This silver poster literature stand includes two 22″w x 28″h snap-open sign holders, which make refreshing artwork an effortless task. To insert new graphics, simply flip up each of the four hinges along the frame. Slide a new sign underneath the non-glare lens, and snap the edges back down. There is no need to detach the accessories from the fixture!

This poster literature stand that is floor-standing measures 75 inches tall and is double-sided. Along each side of the pole is a channel through which each accessory is slide. This gives users the ability to alter the height at which the sign holders and brochure pockets are located. The poster literature stand that is adjustable is constructed from aluminum and has a weighted base to stabilize the entire unit in place. The entire unit weighs 25 pounds, which is heavy enough to withstand use in high-volume locations, yet light enough for quick repositioning throughout a room. The poster literature stand that is well-made from heavy-duty materials is simple to assemble and update.

To install your shelves:

• Remove the top pole cap.
• Loosely attach the connector plate to a brochure shelf.
• Slide the shelf arm and connector into the groove along the pole.
• Slide the pocket down to the desired height and then tighten the screws.

To install your snap-open sign holder:

• Flip up the top and bottom hinges.
• Loosen the connector plate.
• Slide the first and then the second connector plate into the pole.
• Slide the frame down to the desired height.
• Tighten the screws and close the hinges.

This floor-standing fixture is intended for indoor use.